Q.6 SECTION 12, FORCE PROTECTION

Q.6.1 Army Standards

• Unified Facilities Criteria (UFC) 4-010-01, DoD Minimum Antiterrorism Standards for Buildings

• Unified Facilities Criteria (UFC) 4-010-10, DoD Minimum Antiterrorism Standoff Distances for Buildings (This document is a "For Official Use Only (FOUO)" publication. Users may contact the Point of Contact posted at the noted website for inquires regarding this document.)

• Uniform Federal Accessibility Standards (UFAS)

• Americans with Disabilities Act Accessibility Guideline (ADAAG)

• DoD Instruction 2000.16, DoD Antiterrorism Standards

Q.6.2 References

• Unified Facilities Criteria (UFC) 2-600-01, Installation Design, Chap 12

• DoD Handbook 2000.12-H, Protection of DoD Personnel and Activities Against Acts of Terrorism and Political Turbulence, February 1993 (This Handbook is a "For Official Use Only (FOUO)" publication. Users may contact the Point of Contact posted at the following website to obtain a copy of the Handbook.) http://www.dtic.mil/whs/directives/corres/html/o200012h.htm

• Army Regulation (AR) 525-13, The Army Force Protection Program (Available only through the Army Knowledge Online web portal.)

• UFC 4-010-02, DoD Security Engineering Manual, (This document is in draft form. See the Security Engineering Working Group website.

• U.S. Air Force, Installation Force Protection Guide: (Contains information on installation planning, engineering design, and construction techniques that will preclude or minimize the effect of a terrorist attack.)

• Technical Manuals/Air Force Manual series TM 5-853/AFMAN) 32-1071, Security Engineering, 3 volume series: (Volumes 2 and 3 are "For Official Use Only (FOUO)" and are not available on the Army Corps of Engineers publications website. A copy of the manuals can be acquired via your standard publications account. The three volumes cover, Project Development, Concept Design, and Final Design respectively.)

 

Appendix Q - STANDARDS AND REFERENCES