Training Support Center

casket
DVC#LFC-02-CAR

Full sized casket for training funeral detail

us flag
DVC#LFC-29-CAR

For training soldiers how to fold the flag for funeral detail.

advanced land nav (GTA)
DVC#LFC-123-CAR

Flip chart for Training land navigation

polaroid camera
DVC#LFC-78-CAR

Prop Camera

compass, mock-up
DVC#LFC-101-CAR

Visual aid for Compass Training

graves registration kit
DVC#T-10-20

The Graves Registration (GRREG) kit is a hands-on exportable device used to train and evaluate personnel in graves registration operations and procedures.

armor vehicle models
DVC#T-17-102

A set of three-demensional models of solid hard plastic are 1/35th scale models of American and foreign nation armored vehicles.

display board stand
DVC#LFC-83-CAR

3 foot high tripod.

sincgars mock up
DVC#LFC-97-CAR

A 5:1 mockup of the SINCGARS radio. The device is fabricated with the knobs and buttons of the RT 1523D SINCGARS radio.

dry erase board
DVC#LFC-133-CAR

Dry Erase Board that also holds up flip charts.

ceremonial cd
DVC#LFC-143-CAR

Music and bugle calls for ceremonies.

bullhorn
DVC#LFC-128-CAR

Portable bull horn that can be used on ranges, or anywhere voice amplification is needed.

podium
DVC#LFC-98-CAR

Portable podium for use at public ceremonies and formations. Used with the PA system.

projection screen
DVC#LFC-134-CAR

camcorder
DVC#LFC-77-CAR

Non-functional prop.

accident avoidance video
DVC#LFC-144-CAR

wireless mic system
DVC#LFC-80-CAR

Portable PA System.

DIGITAL TIMING BOARD
DVC# LFC-76A-CAR

Laptop computer with timing board program. For tank and BFV Gunnery.

timing board
DVC#LFC-76-CAR

For timing tank and Bradley Gunnery.

radiac set, antenna group
DVC#03-15

Antenna kit for are chemical scanning

identification board
DVC#T05-050

Two dimensional plastic replica training board sets. These recognition boards will show actual dimensions of the ordnance items, enhancing the Soldier's ability to recognize UXO hazards.

tea pot
DVC#LFC-355-CAR

Adds realism to training using COB's

cam simulator
DVC#03-16

Provides realistic training for the CAM. Replicates system employment as closely as technology will permit.

paark system
DVC#LFC-260-CAR

Portable AAR system with the tools to tape, photo, and present a professional AAR. Comes with a camcorder, laptop, monitor, and a Nikon camera.

proxima
DVC#LFC-68-CAR

Limited number are available to augment unit's own Proxima. Memo is required to draw.

pa system, cd/mp3 unit
DVC#LFC-67-CAR

Portable PA system that is available for Ceremonies, Change of Command, Presentations, etc. The system comes with a cordless microphone, CD player or MP3 jack, and 2 speakers.

pugil equipment
DVC#T07-107

Foam padded tubes that are 5 ½ in diameter. Training in one-on-one pugil techniques increase a Soldier's skill in rifle-bayonet fighting, aggression and confidence. This training furnishes the fighter with an opponent who can think, move, fight back, and (most importantly) make corrections. Safety equipment is also available.

EOF Dismounted Module
dvc# 99-116

This kit is used to train soldiers to interact with the local populations. The kit includes a Phraselator, Voice Response Transmitter, Bullhorn, Searchlight, Restraints, and assorted support items.

EOF kit Checkpoint Module
DVC# LFC-395-CAR

This kit provides various items used to set up checkpoints (TCP) and search vehicles and people. The kit includes signs, lights, mirrors, barriers, and scanners.

ied training kit
DVC#T-05-062

Kit contains different types of Iraqi training munitions. The intent is that while training, a unit will be exposed to a wide variety of IEDs. The munitions in the kit would be interchangeable to reflect the weapon of choice used in the area of operation.

tied system / 20 inch tube
DVC#LFC-44-CAR

A modular system used to provide non pyro IED simulators. It comes with a variety of heads to provide realistic look. The systems use compressed CO2 and powder to give a smoke signature for the IED explosion. Training is required to operate these devices.

tied system / 5 inch tube
DVC#LFC-43-CAR

For use with TIED devices.

tied system / basic head
DVC#LFC-31-CAR

For use with TIED devices.

tied system / bomb head
DVC#LFC-33-CAR

For use with TIED devices.

tied system / cannon head
DVC#LFC-36-CAR

For use with TIED devices.

tied system / claymore head
DVC#LFC-35-CAR

For use with TIED devices.

tied system / concentrated 3 hole head
DVC#LFC-32-CAR

For use with TIED devices.

tied system / mortar head
DVC#LFC-34-Car

For use with TIED devices.

tied system / directional claymore head
DVC#LFC-159-CAR

For use with TIED devices.

tied system / pet adaptor head
DVC#LFC-542-CAR

For use with TIED devices.

tied system / 7 hole head
DVC#LFC-543-CAR

For use with TIED devices.

tied system / remote firing device
DVC#LFC-13-CAR

For use with TIED devices.

tied system / multifunction firing device
DVC#LFC-50-CAR

For use with TIED devices.

tied system / 120 mm round
DVC#LFC-40-CAR

For use with TIED devices.

co2 mine
DVC#LFC-116-CAR

Provides effects signature when stepped on. Training is required for these devices.

pressure detonator mine
DVC#LFC-544-CAR

The systems use CO2 and powder to give a signature for the explosion. Training is required to operate these devices.

distraction dvc (grenade)
DVC#LFC-581-CAR

The device use CO2 and powder to give a smoke signature for the explosion. Training is required to operate these devices.

TIED Pressure Release Firing Device
DVC#LFC-580-CAR

For use with TIED devices.

TIED Pressure Detonate Firing Device
DVC#LFC-579-CAR

For use with TIED devices.

tied system / type 1 suicide vest
DVC#LFC-41-CAR

A basic CO2 powered Suicide Bomber device. Training is required for this device.

tied system / type 2 suicide vest
DVC#LFC-118-CAR

A belt mounted Suicide Bomber device. Available in 2 or 4 barrel configuration as well as a right angle configuration. Training is required for this device.

tied system / tied 2 kit
DVC#05-107/1

The kit creates explosion effects with using compressed air and smoke powder. System in non-pyrotechnic and can be fired using wireless remote or in a hard wire configuration.

inert suicide vest
DVC#T-30-30

A full-scale replica of a vest with inert pipe bombs, nails and nuts for shrapnel, and an alarm. this device will alert the students when the trigger device is pressed.

inert suicide bomber kit
DVC#T-30-29

A briefcase that has inert pipe bombs with nails an nuts for shrapnel. the case has a dummy cell phone for a trigger and an alarm that will alert the students when the case is opened.

crew 2 countermeasure system
DVC#11-22

This system is installed in the unit’s vehicles to replicate the Duke system. It has the same controls as the Duke but does not interfere with normal commo. It does however, counter the TIED 2 system of IED trainers. Training is required to operate these devices.

crew 2 cm system / pda
PN: AFC-336

This device is used to upload and download information from the CREW 2. Training is required to use this device.

crew 2 cm system / laptop
PN: AFC-336

This device is used to create frequency sets for the CREW 2, and CVRJ trainers. It is also used to analyze information downloaded from the CREW 2. Training is required to use this device.

CREW VEHICLE RECEIVER/JAMMER (CVRJ)
DVC# 30-34

Provides realistic training in the use of current electronic countermeasures (ECM) equipment in respect to an adaptive threat and the potential impacts of radio frequency (RF) emitters on C2 systems equipment. Training is required to operate this device.

MOBILE MULTI-BAND JAMMER (MMBJ)
DVC# 30-33

Provides realistic training in the use of current electronic countermeasures (ECM) equipment in respect to an adaptive threat and the potential impacts of radio frequency (RF) emitters on C2 systems equipment.

IEDES NON-PYRO Set
DVC# 05-114/1

The purpose of the IEDES 1 Training System is to provide visual and audio signature effects that realistically replicate combat situations, in support of Explosive Hazard Defeat (EHD) training objectives. Training is required to use this device.

IEDES PYRO Set
DVC# 05-118

The IEDES Pyro kit works with the IEDES Non-Pyro kit to provide an additional Pyro signature to the effects of the IEDES. System requires M30 pyro cartridges or M31A1 starburst cartridges available through unit ammo sources. Training is required to use this device.

9mm plastic pistol
DVC#T-07-99

Full-scale, three dimensional plastic replica of a U.S M9. This device can be used for drill and ceremony, instruction, physical training, drown proofing, vehicle searches, op for players, and demonstrations.

pm-50 mock pistol
DVC#T-30-08

Full-scale, three dimensional plastic replica. This device can be used for instruction, vehicle searches, op for players, and demonstrations.

m16 a1 plastic weapon
DVC#T-07-83A

Full-scale, three dimensional plastic replica of M16A1 rifle to be used for drown Proofing.

m16 a2 plastic weapon
DVC#T-07-83B

Full-scale, three dimensional plastic replica of M16A2. This device can be used for drill and ceremony instruction, physical training, vehicle searches, op for players, and demonstrations.

m4 plastic carbine
DVC#T-07-96

Full-scale, three dimensional plastic M4 Carbine. This device can be used for drill and ceremony instruction, physical training, vehicle searches, op for players, and demonstrations.

1903 Springfield Drill Rifle
DVC# LFC-630-CAR

Full scale replica of M1903A3 Springfield rifle for use as Drill rifle and honor guards.

ak-47 mock weapon
DVC#T-30-006

Full-scale, three dimensional plastic replica of an AK47, the most common weapon used by the opposing forces. This device can be used for instruction, vehicle searches, op for players, and demonstrations.

mp-40 mock weapon
DVC#LFC-121-CAR

Full-scale, three dimensional plastic replicas of SMG MP-40.

PKM, Mock Weapon
DVC#LFC-102-C

Full-scale, three dimensional plastic replica of light Soviet machine gun. This device can be used for vehicle searches, op for players, and demonstrations.

svd sniper rifle
DVC#T-30-18

Full-scale, three dimensional plastic replicas of a Dragonov sniper rifle. This device can be used for instruction, vehicle searches, op for players, and demonstrations.

rpk squad machine gun
DVC#T-30-07

Full-scale, three dimensional plastic replica of a Soviet RPK. This device can be used for instruction, vehicle searches, op for players, and demonstrations.

rpg-7 launcher w/ grenade
DVC#T-30-05

Full-scale, three dimensional plastic replicas of a RPG-7. This device can be used for ony instruction, vehicle searches, op for players, and demonstrations.

m79 mock weapon
DVC#LFC-12-CAR

Full-scale, three dimensional plastic replicas of a M79 Grenade launcher.

sks rifle
DVC#LFC-88-CAR

Full-scale, three dimensional plastic replica.

sa-18 grail
DVC#LFC-127-CAR

AT-4 Inert Launcher
DVC#LFC-135-CAR

Inert tube for AT-4 training.

JAVELIN Dummy round
DVC#LFC-136-CAR

Inert weighted dummy JAVELIN round that can be used with the unit owned CLU to train gunners.

2:1 Scale M16A2 Rifle
DVC#A09-20

For classroom training on the M16 Family of weapons.

xm-1 pneumatic machine gun simulator
DVC#LFC-60-CAR

The device provides simulated machine gun fire for training, thus adding realism to day or night training maneuvers and conditioning soldiers to the sound and flash of weapons fire. They operate on oxygen and propane.

XM2A MG SIMULATOR
DVC# LFC-60A-CAR

The device provides simulated machine gun fire for training, thus adding realism to day or night training maneuvers and conditioning soldiers to the sound and flash of weapons fire. They operate on oxygen and propane.

xm-10 arty simulator
DVC#06-19

The devices are noise simulators which can be used in all types of combat courses. They can be used to simulate the noise of artillery and mortar fire, demolitions, and mines. They operate on oxygen and propane and remote electric firing.

riddle sighting device
DVC# T-07-87

Weapon training support device for use during basic rifle marksmanship training.

m15 sighting device
DVC#A07-26

Weapon training support device for use during basic rifle marksmanship training.

sighting device
DVC#T-07-84B

A metal frame that attaches to the rear of the M16A1/A2 rifle carrying handle. A piece of smoked plexiglass is inserted in the frame to allow a coach to view the Soldier's aiming point.

target box paddle
DVC#T-07-86

Soldiers practice with this device to insure that they can find the same aiming point each time they fire. Soldiers look through the sights of a rifle, (in a cradle), and tell in which direction they need to move the paddle.

shadow box
DVC#T-07-105

A wooden crate device that provide a position cradle for firing and aiming the weapon. This device is used for basic rifle marksmanship training.

range paddle
DVC#LFC-69-CAR

Red/White Range Safety paddles. For line safety use on small arms ranges

clearing rod
DVC#LFC-72-CAR

Brass clearing rods for rifle ranges

bore sight laser
DVC#LFC-369-CAR

For bore sighting optics on M16/M4 weapons.

120mm training round heat
DVC#T17-108

Rounds are used by instructors to provide Soldiers training in ammunition identification, experience in handling, and chamberiing of the sercie rounds in a manner to stress safety and avoid damage to service projectiles.

120mm canister training round
DVC#T17-113

Rounds are used by instructors to provide Soldiers training in ammunition identification, experience in handling, and chamberiing of the sercie rounds in a manner to stress safety and avoid damage to service projectiles.

120mm sabot training round
DVC#T17-107

Rounds are used by instructors to provide Soldiers training in ammunition identification, experience in handling, and chamberiing of the sercie rounds in a manner to stress safety and avoid damage to service projectiles.

120mm training round, heat-mp-t
DVC#T17-111

Rounds are used by instructors to provide Soldiers training in ammunition identification, experience in handling, and chamberiing of the sercie rounds in a manner to stress safety and avoid damage to service projectiles.

m203 plastic inert round
DVC#LFC-113-car

For the M203 Launcher

crater charge
DVC#LFC-90-car

Inert

shape charge, 40#
DVC#LFC-89-car

INERT

shape charge, 15#
DVC#LFC-151-car

INERT

c4 blocks, m112
DVC#LFC-150-car

Inert

trip wire spool
DVC#LFC-141-car

m605 fuze
DVC#05-48h

155mm dummy projectile
DVC#LFC-14-car

anti-personnel breaching system
DVC#a05-103/1

To provide the soldier with a classroom training aid as well as afield training aid for use in collective training environment.

mod pack mine system (mopms)
DVC#a05-20

The M136 MOPMS Training Dispenser is the trainer for the M131 MOPMS Ground Dispenser and Mine. It is used to demo operation and maintenance procedures.

sweep monitoring system
DVC#05-105

The Sweep Monitoring System (SMS) is a training device for training any MOS that is currently required to operate the AN/PSS-12. Device records and evaluates technique of operation of the mine sweeper.

Training Target Set
DVC#05-105/1

Mine target set for use with the SMS and unit owned mine sweepers.

uxo bomb / grenade
DVC#LFC-105-car

A set of plastic and metal replicas of explosive ordnance items for training purposes. The items are divided into one of the four types: dropped, projected, thrown, and placed. They are designed to be used for classroom and outdoor instruction for unexploded ordnance (UXO) training. The items will be issued separately; this is not designed to be issued as a "package."

shock tube with initiator
DVC#LFC-129-car

INERT

m14, anti-personnel mine
DVC#t23-38

INERT

m15, anti-tank mine
DVC#LFC-125-car

INERT

m16a1 anti-personnel mine
DVC#t23-034

INERT

m19, anti-tank mine
DVC#LFC-124-car

INERT

m21 anti-tank mine
DVC#t23-33

INERT

placed training mine kit
DVC#t05-041

Kit used to demonstrate and practice arming and disarming procedures of mines anb booby traps.

combination mine
DVC#t23-40

M-21 Mine with tilt rod set up.

Spider Training Device
DVC#05-22

This device is used for training on the SPYDER Device.

cpr, head & torso manikin
DVC# 08-16

Provides realistic practice in mouth-to-mouth and/or cardiopulmonary resuscitation

basic buddy; cpr manikin w/bag
DVC#lfc-18-car

Provides realistic practice in mouth-to-mouth and/or cardiopulmonary resuscitation

full body cpr manikin
DVC#lfc-85-car

litter
DVC#lfc-99-car

casualty simulation kit
DVC# 08-14

Provides materials for realistically simulating many types of wounds incurred in battle or disaster. The materials are used in training first aid to casualties.

infant cpr manikin
DVC# 08-20

iv therapy arm
DVC# 08-05a

To provide realistic practice in performing intravenous injections in the antecubital area and dorsum part of the hand.

nerve agent antidote injection
DVC# 08-36

Training MK-1 Kit

body part wounds
DVC#lfc-142-car

pnuemothorax trainer
DVC#lfc-142-car

Basic model to be used for doing needle decompressions.

super pnuemothorax
DVC#lfc-380-car

Advanced model that allows training on chest decompressions, CPR, and inserting a trachea tube.

super anne
DVC#08-15/a

The device provides realistic practice in mouth-to-mouth and/or cardiopulmonary resuscitation, bleeding control, and administering IV's.

i-stan
DVC#lfc-250-car

Advanced Medical treatment dummy. I-STAN is a tether less remote controlled device that can provide training for Medics, and other medical personnel. I-STAN requires certification to operate.

mega code kelly
DVC#08-38

Full body manikin with electronics to simulate BP, ECG, Breathing rate, pulse, Heart rate, and Defibrillation.

febss/cpr deluxe manikin
DVC#lfc-576-car

Delux CPR manikin with wounds such as broken leg, gut wound, sucking chest wound, burns and compound fracture. Can be used with or without the FEBSS system.

febss deluxe system
DVC#lfc-561-car

System provides realistic bleeding when used with the Deluxe Manikin. Comes with ACU and vest

dcu / bottom
DVC#lfc-86b-car

dcu / top
DVC#lfc-86-car

brown bottom
DVC#a08-16

brown top
DVC#lfc-21-car

tiger stripe bottom
DVC#t-30-16

tiger stripe top
DVC#t-30-16a

grey bottom
DVC#lfc-390-car

grey top
DVC#lfc-389-car

black bottom
DVC#lfc-234-car

black top
DVC#t-30-28a

opfor shirt, tan
DVC#lfc-20-car

opfor shirt, green
DVC#t-30-17

islamic headband / scarf
DVC#lfc-65-car

islamic clothing, men
DVC#lfc-63-car

clothing, islamic woman
DVC#lfc-64-car

islamic women scarf
DVC#lfc-64c-car

islamic woman veil
DVC#lfc-64b-car

ip police shirt/armband
DVC#lfc-87-car

opfor flag
DVC#lfc-30-car

pakistani vest
DVC#lfc-535-car

traditional wool pakol
DVC#lfc-536-car

cotton kufi
DVC#lfc-537-car

burqa
DVC#lfc-538-car

khimar
DVC#lfc-539-car

m4/m16 bolt
DVC#07-164

Converts unit owned M-4/M16 to fire sim rounds (UTM) Ammo is available through the regular ammo supply system.

m9 bolt
DVC#07-163

Converts unit owned M9 to fire sim rounds (UTM) Ammo is available through the regular ammo supply system.

m249 conversion kit
DVC#07-165

Converts unit owned M249 to fire sim rounds (UTM) Ammo is available through the regular ammo supply system.

protective equipment
DVC#lfc-62-car

Face mask is required to draw UTM equipment.

m287 launcher for at-4 wpn
DVC#afc-119

Simulates operation and firing of the AT-4 Tactical Aniti-Tank Weapon. It allows a soldier to fire a 9mm tracer bullet at stationary and moving armor targets. Requires appointment to draw and must be stored in arms room.

m261 .22 conversion for m16
DVC#07-55

The Conversion Kit (CK) provides a method to use .22 caliber LR, rimfire ammunition in the M16/M4 Rifle for individual training purposes. Requires appointment to draw and must be stored in arms room.

aimtest .50 cal inbore device
DVC#17-277

This device (known as the .50 caliber Advanced Inbore Marksmanship Training Enhancement System for Tanks - AIMTEST) is an integral component for Abrams Tank Crew Gunnery Training to conduct subcal sustainment and remedial training. Requires appointment to draw and must be stored in arms room.

small lmts suite
DVC#07-133

2 large (TR-900) and 2 small (TR-700) targets.

mini ret 7 target system
DVC#lfc-09-car

7 small (TR-700) targets on lifters

sniper set
DVC#lfc-07-car

For sniper training

l-catts w/laptop
DVC#lfc-05-car

7 E-type and F-type targets on lifters Programmable for indoors or outdoors use.

large lmts suite
DVC#07-133

6 Large targets (TR-900)

warrior kit
DVC#07-132a

6 large targets (TR-900), 6 small targets (TR-700), 1 machine gun target, and all accessories to conduct training

engagement skills trainer
DVC#07-129

We have 6 classrooms of EST available to use. Units can schedule use through the TSC personnel at Bldg. 1698. EST provides realistic training in Marksmanship, Collective (force on force) and Shoot Don't Shoot Scenarios.

hmmwv egress assistance trainer (heat)
DVC#55-62

The Heat is used to train soldiers to react and survive a vehicle roll over. It allows units to develop SOP's for exiting the vehicle in various positions after the roll over. We have 3 HEAT trainers located at Bldg. 1698.

call for fire trainer (cfft)
DVC#06-118-1,2,3

The CFFT provides realistic high fidelity virtual environments and intelligent friendly, opposing and non-combatant simulated forces. The CFFT is designed to provide quality training for any MOS that needs to call for indirect fire. A 1-30 classroom, a 1-4 classroom, and a 1-12 system are available at building 1698. 1-12 systems are also available for check out at building 1230. The CFFT requires a certified operator.

MRAP EGRESS TRAINER (MET)
DVC# 55-66

The MET is used to train soldiers to react and survive a vehicle roll over. It allows units to develop SOP's for exiting the vehicle in various positions after the roll over. Current configuration is the MATV cab. The MET is located at building 1698.

IWS M4/M16 Kit
DVC 23-67

Kit consists of M14/M16 SAT, Halo, and H-Harness

IWS M249 SAT
DVC 23-71

Fits current issue M249

IWS M240 SAT
DVC 23-70

Fits M240 B

IWS M2 XMTR
DVC 23-66

Fits .50 cal MG

IWS M107 XMTR
DVC 23-79

Fits sniper rifle M107. It is part of the Sniper kit.

IWS M110 SAT
DVC 23-79

Fits sniper rifle M110. It is part of the Sniper kit.

IWS MAjIK
DVC 23-77

Used to zero IWS SATs

legacy M16/M4 XMTR, halo torso
DVC #23-80/13

legacy M249 AND M240B XMTR
DVC# 23-80/14 and DVC # 99-76

legacy SNIPER SET
DVC#99-45

Used with M21/M24 rifle.

legacy M2 MACHINEGUN XMTR
PN: 11836210

legacy M4/203 XMTR
PN: 93599249-1

I-MILES UCD
DVC# 23-101

Controller gun for all generations of MILES

I-MILES MCD
DVC #23-101A

AT-4 SLM
DVC #23-102A

RPG SLM
DVC# 23-102B

BFA 19 FOR .50 CAL MG
DVC# 07-59

The device permits firing of blank .50 caliber ammunition with the M2 machine gun.

BFA 21 FOR 240C ON TANK
DVC# 17-134

This device is designed for the M240C Coax on the M-1 tank or Bradley.

SAAF
DVC #99-25

M2A3 PGS
DVC# 17-172/9

VEHICLE MILES. Used on the M2A3/M3A3 vehicles for simulated gunnery or force on force training.

PGS CONTROLLER GUN
DVC #17-172/7

For use with PGS

PGS SCORING DEVICE
DVC #99-63

MINI-RET
DVC# 17-172/6M

RDU
DVC# 17-172/6

M2 BRADLEY LEGACY MILES
DVC# 23-80/10

Used on ODS and earlier BFV's

BRADLEY SHELF
PN:AFC-240

Used to mount Legacy MILES on the BFV.

M1 TANK KIT
DVC #23-80/12

Used on all versions of the M1 Tank

SEP ADAPTOR KIT
DVC #99-68

Adapts the basic kit to the SEP Tank

TANK DONUT
PN: AFC-239

Adapts tank laser to the 120mm gun.

MGSS MAIN GUN SIGNATURE SIMULATOR
DVC# 23-92

Replicates main gun signature when used with MILES .

I-MILES WITS 113 KIT
DVC #23-97B

Wireless kit for use on 113 family of vehicles, large trucks, light tracks.

I-MILES WITS KIT
DVC #23-97A

Wireless kit for wheel vehicles comes with 2 kits per box.

TSV M2A3 KIT
DVC #17-282

Thru site video for M2/M3 A3 Bradley

TSV SCORING DEVICE
DVC #17-282-3

JAVELIN BASIC SKILLS TRAINER
DVC# 07-126

The BST is a three-dimensional training device used to train students and qualify gunners on the Javelin weapon system.

TOW ITAS BST
DVC 07-78B

Used for training ITAS gunners in a controlled environment

TOW ITAS FTS
DVC 07-158

Used for simulated ITAS gunnery as well as functions as ITAS TOW MILES

JAVELIN FTT
DVC 07-127

Used for simulated Javelin gunnery or for Javelin MILES.